KHUA® Resin For HAA Cure

 KHUA® Resin For HAA Cure

Product Curing
Condition
Ratio of PE/
Hardener
Tg
(℃)
Flow
(PCI)
Acid Value
(mgKOH/g)
Viscosity@200℃
(mPa.s)
Properties MSDS TDS
Standard Durable
EP-3120 180℃/10' 95/5 64 6 28-34 3500-5500 Excellent mechanical property and excellent weathering resistance
EP-3121 180℃/10' 95/5 62   32-36 3200-4500 Good over-baking properties
EP-3123 180℃/10' 95/5 60 6-7 28-34 1500-3500 Very good flow
EP-3122○△ 180℃/10' 95/5 61 6-7 30-35 2800-4000 Excellent weathering resistance, suitable for tribo gun, gas-oven resistance
EP-3125△ 180℃/10' 95/5 62 7-8 30-36 2800-4100 Very good flow, gas-oven resistance, no pin-hole with thicker film
EP-3126 180℃/10' 95/5 61 7 28-34 3000-5000 Good flow and weathering resistance, excellent mechanical properties, for general industrial use
EP-3127 180℃/10' 95/5 62 7 30-36 2800-4100 Good flow
EP-3128 180℃/10' 95/5 56 7 32-38 2500-4000 Good degassing
Low Hardener Demand
EP-3101 200℃/10' 96.5/3.5 62 6 19-24 6500-8500 Low Hardener Demand
Super Durable
EP-5103 180℃/10' 95/5 62 6-7 32-38 1500-2400 Superdurable weathering resistance, very good flow
Dry Blend Matt
EP-4106○△ 180℃/10' 97/3 61 6-7 19-22 6000-10000 For matt systems as slow component; Dry blend with GH-4407 to get gloss 30~36% @ 60°
EP-4107○△ 180℃/10' 93/7 58 6-7 45-51 4300-7300 For matt systems as fast component; Dry blend with GH-4406 to get gloss 30~36% @ 60°

Tribo Gun Over bake resistance Viscosity at 175℃

Message Board
  • captcha